Divert Valves ECOVENT® W/ECO

ECOVENT® single-seat divert valves are used for simple divert functions in hygienic applications. The valves are characterized by their ease of operation and flexibility. The individual variants are designed for different flow directions.


In single-seat shuttle valves, there is only one seal for each switching position in the valve disc separating the particular pipelines from one another. This means liquid can pass from one pipeline to the other in the eventuality of a seal defect. For this reason, single-seat shut-off valves are not suitable for separating incompatible fluids.

Special Features

  • Certified, hygienic configuration
  • Metallic stop
  • Flexibility because of the modular principle
  • Proven seal geometry
  • Availability of two valve series


The ECOVENT® valve series is characterized by its compact design. Contrary to the VARIVENT® systems with multiple options, this series provides a simple and economical solution for standard requirements.

Single-seat divert valves
DN 10 – DN 100
OD 1″ – OD 4″

Application Examples

In practice, these valves are frequently used in CIP supply and return lines. One typical application is also found at the end of a valve block in which the valves are fitted as divert valves between the process line and the drainage (e.g. during pushing out).

Recommended Flow Direction

To avoid water hammers when closing one path while the product is flowing, single-seat divert valves should be switched against the flow direction of the product if possible.

Valve Selection Scheme
Feature Type
Product-merging Compact Design Single-seat Valve, Type W/ECO
Product-merging Small Nominal Width

DN 10 or DN 15

Single-seat Valve, Type W/ECO small


I have read and agree to the Privacy Policy

ECOVENT® Divert Valve,Type W/ECO

Please refer to the catalog for information.

Technical Data of the Standard Version
Type W/ECO
Recommended flow direction Product-merging
Material in contact with the product 1.4404 / AISI 316 L
Material not in contact with the product 1.4301 / AISI 304
Seal material in contact with the product EPDM, FKM, HNBR
Ambient temperature 0 to 45 °C
Air supply pressure 6 bar (87 psi)
Product pressure 5 bar (73 psi)
Surface in contact with the product Ra ≤ 0.8 μm
External housing surface Matte blasted
Control and feedback system Connection 0 (without control top)
Actuator type Pneumatic actuator air / spring
Connection fittings Welding end
Identification Adhesive ID tag
Valve seat version Clamped seat ring or fixed vertical port
Certificates A3, CE


I have read and agree to the Privacy Policy

Show Buttons
Hide Buttons