Goedhart VRS


The range Goedhart VRS single discharge ceiling mounted customized air coolers are suitable industrial cooling and freezing applications. This range with a complete stainless coil block is especially designed for corrosive surroundings. The possible air direction is blow-through or draw-through (please specify when ordering).

Kelvion Goedhart Customized Air Cooler VRS
Kelvion Goedhart Customized Air Cooler VRS

The Goedhart VRS series is part of our systematic customized series. The advantage: A very high degree of customization is evident. The coil blocks have stainless tubes expanded into fully collared aluminium fins. A good thermal contact is achieved by expansion of the tubes into the fin collars, that are also utilised as spacers to provide a constant distance between the fins. All coolers are pressure tested to 40 bar (lower by cooling mediums) and are supplied with a light over pressure charge of dried air. Suitable for NH3/CO2/H(C)FC- pump system and de system and the most coolants.


  • Customize the air cooler with many available options and accessories
  • Variable air direction of all fan variants – blow-through as draw-through
  • Easy installation: Delivered on a wooden frame for easy mounting
  • Powerful when needed: Application-suited circuit design
  • Easily accessible and easy to clean components: Hinged drip tray prepared, easy removable cover plates
  • Long-term assurance: ErP 2015 fans, increased lifetime in aggressive environments, higher resistance against cleaning chemicals in the food industry (HACCP)
Engineering level Customized products
Application Hygienic Cooling (complete stainless steel)
Number of types 24
Capacities NH3 5 – 55 kW (NH3 pump System – SC2)
Capacities CO2 4 – 44 kW (CO2 dx – SC2)
Capacities Coolant 6 – 70 kW (E-glycol 37% tl1=5°C tin=-7°C tout=-4°C)
Fan diameter 500 and 630 mm
Max. number of fans each aircooler 4
Air configuration blow-through (Goedhart® VRe-B), draw-through (Goedhart® VRe-Z)
Suitable NH3/CO2/H(C)FC pump System and DE System and the most coolants
Tube pitch square
Fin spacing 4, 6, 7, 8, 10 and 12 mm
Tube material Stainless steel o.d. 15 mm
Fin material Aluminum
Mounting Construction for ceiling mounting. The flush mounting protects against and prevents accumulation of dust and dirt
Sheet material Casing material of galvanized sheet steel
Finishing Neutral
Connection/Header side Protection by removable end covers, easy removed for maintenance
Drip tray Hinged prepared
Fasteners Stainless steel
Fixing defrost Defrost by hot gas spiral or electric defrost elements will be fixed to the bottom side of the coil
  • Blow-through
  • Draw-through
  • Electrical defrost
  • Hot gas defrost
  • Water defrost
  • Secondary defrost
  • Anti-condensation heating drip tray
  • Fan heating
  • Hinged fans
  • Hinged drip tray
  • Insulated drip tray
  • Polyester drip tray
  • Sock connection
  • Sock connection+air straightner
  • Defrost sock
  • Diffusor
  • Diffusor+dampers
  • Insulation disks
  • Feet for floor mounting
  • Fan Hood
  • Hood fin side
  • 60Hz Fans
  • EC Fans
  • 1 Phase Fans
  • Coolants
  • DE System
  • CO2
  • Vertical Connections
  • Other casing materials
  • Other fin spacings
  • Almg fins
Show Buttons
Hide Buttons