Goedhart VRe


The Goedhart VRe customized air cooler models are highly effective, for example, for application in food and beverage distribution centers, logistics centers and production shop floors. As required by market demand, models in the Goedhart VRe serie feature few but large fans. With the newly designed modules the speed of the fans and the air velocity through the coil are reduced.

The Goedhart VRe series is part of our customized series. The advantage: A very high degree of customization is evident. Circuits matched to application give great performance and the optimized heat exchanger geometry have a greater specific output of the heat exchanger. This High Performance Aircooler is available for both air flow directions (draw-through and blow-through). As a result, the Goedhart VRe can be flexibly and effectively designed for individual refrigeration requirements – especially for complex applications.

The coil blocks have stainless tubes expanded into fully collared aluminium fins. A good thermal contact is achieved by expansion of the tubes into the fin collars, that are also utilised as spacers to provide a constant distance between the fins. All coolers are pressure tested to 40 bar (lower by cooling mediums) and are supplied with a light over pressure charge of dried air. Suitable for NH3/CO2/H(C)FC- pump system and de system and the most coolants.

The 710 and 800 mm types are executed with ZAplus fans (most energy efficient fan on the market today). Your benefits in cold rooms: strong and focused air flow with larger air flow rates and greater air throw enable you to achieve fast cooling and freezing rates.

The Goedhart VRe is an adaptability artist. With its countless possible configuration possibilities, the Goedhart VRe can be designed spot-on for the most demanding refrigeration tasks.


  • High performance due to application-suited circuit design
  • Variable air direction of all fan variants – blow-through as draw-through
  • Easy installation: Delivered on a wooden frame for easy mounting
  • Customize the air cooler with many available options and accessories
  • Long-term assurance: highly efficient, ErP 2015 fans, 710 and 800 mm types executed with ZAplus fans
  • Higher specific power, reduced fan speed and air velocity through the coil and significantly reducced current consumption
Engineering level Customized products
Application Cooling and Freezing (+45°C to -40°C)
Number of types 72
Capacities NH3 8,4 – 202 kW (NH3 pump System – SC2)
Capacities CO2 5,6 – 163 kW (CO2 dx – SC2)
Capacities Coolant 13 – 363 kW (E-glycol 37% tl1=5°C tin=-7°C tout=-4°C)
Fan diameter 500, 630, 710 and 800 mm
Max. number of fans each aircooler 6
Air configuration blow-through (Goedhart® VRe-B), draw-through (Goedhart® VRe-Z)
Suitable NH3/CO2/H(C)FC pump System and DE System and the most coolants
Tube pitch square
Fin spacing 4, 6, 7, 8, 10 and 12 mm
Tube material Stainless steel o.d. 15 mm
Fin material Aluminum
Mounting Construction for ceiling mounting
Sheet material Casing material of galvanized sheet steel
Finishing Standard white epoxy spray finishing
Refrigeration Connections Standard positioned on the left hand side of the unit when looking with the direction of the airflow
Connection/Header side Protection by removable end covers, easy removed for maintenance
Drip tray Hinged drip tray prepared
Fasteners Stainless steel
Fixing defrost Defrost by hot gas spiral or electric defrost elements will be fixed to the bottom side of the coil
  • Blow-through
  • Draw-through
  • Electrical defrost
  • Hot gas defrost
  • Water defrost
  • Secondary defrost
  • Anti-condensation heating drip tray
  • Fan heating
  • Hinged fans
  • Hinged drip tray
  • Insulated drip tray
  • Polyester drip tray
  • Sock connection
  • Sock connection+air straightner
  • Defrost sock
  • Diffusor
  • Diffusor+dampers
  • Insulation disks
  • Feet for floor mounting
  • Fan Hood
  • Hood fin side
  • 60Hz Fans
  • EC Fans
  • Coolants
  • DE System
  • CO2
  • Vertical Connections
  • Other casing materials
  • Other fin spacings
  • Almg fins
  • Goldlack fins
Show Buttons
Hide Buttons