Goedhart VRB/VRZ


The Goedhart VRB/VRZ range of single discharge ceiling mounted customized industrial air coolers are suitable industrial cooling and freezing applications.

The Goedhart VRB/VRZ series is part of our customized series. The advantage: A very high degree of customization is evident. Circuits matched to application give great performance and the optimized heat exchanger geometry have a greater specific output of the heat exchanger. This High Performance Air cooler is available for both air flow directions (draw-through and blow-through). As a result, the Goedhart VRB/VRZ can be flexibly and effectively designed for individual refrigeration requirements – especially for complex applications.

The coil blocks have stainless tubes expanded into fully collared aluminium fins. A good thermal contact is achieved by expansion of the tubes into the fin collars, that are also utilised as spacers to provide a constant distance between the fins. All coolers are pressure tested to 40 bar (lower by cooling mediums) and are supplied with a light over pressure charge of dried air. Suitable for NH3/CO2/H(C)FC- pump system and de system and the most coolants.

The Goedhart VRB/VRZ is an adaptability artist. With its countless possible configuration possibilities, the Goedhart VRB/VRZ can be designed spot-on for the most demanding refrigeration tasks.


  • High performance due to application-suited circuit design
  • Variable air direction of all fan variants – blow-through as draw-through
  • Easy installation: Delivered on a wooden frame for easy mounting
  • Long-term assurance: highly efficient, ErP 2015 fans
  • Customize the air cooler with many available options and accessories
  • Higher specific power, reduced fan speed and air velocity through the coil and significantly reducced current consumption
Engineering level Customized products
Application Cooling and Freezing (+45°C to -40°C)
Number of types 720
Capacities NH3 3,8 – 252 kW (NH3 pump System – SC2)
Capacities CO2 1,9 – 232 kW (CO2 dx – SC2)
Capacities Coolant 4,4 – 365 kW (E-glycol 37% tl1=5°C tin=-7°C tout=-4°C)
Fan diameter 450, 560 and 630 mm
Max. number of fans each aircooler 8
Air configuration blow-through (Goedhart® VRB), draw-through (Goedhart® VRZ)
Suitable NH3/CO2/H(C)FC pump System and DE System and the most coolants
Tube pitch square
Fin spacing 4, 6, 7, 8, 10 and 12 mm
Tube material Stainless steel 304 (stainless steel 316 optional)
Fin material Aluminum
Mounting Construction for ceiling mounting. The flush mounting protects against dust and dirt
Sheet material Casing material of galvanized sheet steel
Finishing Standard white epoxy spray finishing
Refrigeration Connections Standard positioned on the left hand side of the unit when looking with the direction of the airflow
Connection/Header side Protection by removable end covers, easy removed for maintenance
Drip tray Hinged drip tray prepared
Fasteners Stainless steel
Fixing defrost Defrost by hot gas spiral or electric defrost elements will be fixed to the bottom side of the coil
  • Blow-through
  • Draw-through
  • Electrical defrost
  • Hot gas defrost
  • Water defrost
  • Secondary defrost
  • Anti-condensation heating drip tray
  • Fan heating
  • Hinged fans
  • Hinged drip tray
  • Insulated drip tray
  • Polyester drip tray
  • Sock connection
  • Sock connection+air straightner
  • Defrost sock
  • Diffusor
  • Diffusor+dampers
  • Insulation disks
  • Feet for floor mounting
  • Fan Hood
  • Hood fin side
  • 60Hz Fans
  • EC Fans
  • 1 Phase Fans
  • Coolants
  • DE System
  • CO2
  • Vertical Connections
  • Other casing materials
  • Other fin spacings
  • Almg fins
  • Goldlack fins
Show Buttons
Hide Buttons