Goedhart VCE


The Goedhart VCe industrial air cooler models are highly effective, for example, for application in food and beverage distribution centers, logistics centers and production shop floors. As required by market demand, models in the Goedhart VCe serie feature few but large fans. With the newly designed modules the speed of the fans and the air velocity through the coil are reduced.

The Goedhart VCe series is part of our customized series. The advantage: A very high degree of customization is evident. Circuits matched to application give great performance and the optimized heat exchanger geometry have a greater specific output of the heat exchanger. This High Performance Aircooler is available for both air flow directions (draw-through and blow-through). As a result, the Goedhart VCe can be flexibly and effectively designed for individual refrigeration requirements – especially for complex applications.

The coil blocks have copper tubes mechanically expanded into fully collared aluminium fins. A good thermal contact is achieved by expansion of the tubes into the fin collars, that are also utilised as spacers to provide a constant distance between the fins. All coolers are pressure tested to 40 bar (lower by cooling mediums) and are supplied with a light over pressure charge of dried air. Suitable for almost all known refrigerants and coolants, with the exception of NH3. For CO2 applications we have a special LX-range available.

The 710 and 800 mm types are executed with ZAplus fans (most energy efficient fan on the market today). Your benefits in cold rooms: strong and focused air flow with larger air flow rates and greater air throw enable you to achieve fast cooling and freezing rates.

The Goedhart VCe is an adaptability artist. With its countless possible configuration possibilities, the Goedhart VCe can be designed spot-on for the most demanding refrigeration tasks.


  • Easy installation: Delivered on a wooden frame for easy mounting
  • Variable air direction of all fan variants – blow-through as draw-through
  • Long-term assurance: highly efficient, ErP 2015 fans, 710 and 800 mm types executed with ZAplus fans
  • Easily accessible and easy to clean components
  • High performance due to application-suited circuit design
  • For cooling and freezing application
  • Higher specific power, reduced fan speed and air velocity through the coil and significantly reduced current consumption
  • Flexible power spectrum due to a numerous of variants and configuration possibilities (plain or internally enhanced copper tubes)
Engineering level Customized products
Application Quiet Cooling and Freezing (+45°C to -40°C)
Number of types 132
Capacities HFO/HFK 5,6 – 185 kW (R404A dx – SC2)
Capacities CO2 5,5 – 179 kW (CO2 dx – SC2) up to 60 bar
Capacities Coolant 11,7 – 306 kW (E-glycol 37% tl1=5°C tin=-7°C tout=-4°C)
Fan diameter 500, 630, 710 and 800 mm
Max. number of fans each aircooler 6
Air configuration blow-through (Goedhart® VCe-B), draw-through (Goedhart® VCe-Z)
Suitable for all known refrigerants and coolants, with the exception of NH3
Tube pitch square
Fin spacing 4, 6, 7, 8, 10 and 12 mm
Tube material Copper 15 mm internally plain (p) or internally enhanced (i)
Fin material Aluminum
Mounting Construction for ceiling mounting. The flush mounting protects against dust and dirt
Sheet material Casing material of galvanized sheet steel
Finishing Standard white epoxy spray finishing
Connection/Header side Protection by removable end covers, easy removed for maintenance
Drip tray Hinged drip tray prepared
Fasteners Stainless steel
Fixing defrost Defrost by hot gas spiral or electric defrost elements will be fixed to the bottom side of the coil
  • Blow-through
  • Draw-through
  • Internally plain tube (p)
  • Internally enhanced tube (i)
  • Electrical defrost
  • Hot gas defrost
  • Water defrost
  • Secondary defrost
  • Anti-condensation heating drip tray
  • Fan heating
  • Hinged fans
  • Hinged drip tray
  • Insulated drip tray
  • Polyester drip tray
  • Plastic air streamer
  • Sock connection
  • Sock connection+air straightner
  • Defrost sock
  • Diffusor
  • Diffusor+dampers
  • Insulation disks
  • Feet for floor mounting
  • Fan Hood
  • Hood fin side
  • 60Hz Fans
  • 1 Phase Fans
  • Coolants
  • Pump System
  • CO2
  • Vertical Connections
  • Other casing materials
  • Other fin spacings
  • Almg fins
  • Goldlack fins
Show Buttons
Hide Buttons