Goedhart DZS


Goedhart DZS, dual discharge customized industrial air coolers for working/preparation rooms and for storage rooms for humidity sensitive products.

The Goedhart DZS range is part of our customized industrial series. The advantage: A very high degree of customization is evident. Circuits matched to application give great performance and the optimized heat exchanger geometry have a greater specific output of the heat exchanger. This High Performance Air cooler is available for both air flow directions (draw-through and blow-through). As a result, the Goedhart DZS can be flexibly and effectively designed for individual refrigeration requirements – especially for complex applications.

The coil blocks have steel tubes and steel fins hot dipped galvanized and are suitable for NH3, CO2 and Coolants as a cooling medium. All evaporator coils are pressure tested to 40 bars and supplied with a light overpressure charge. Standard refrigerant connections are positioned on the left hand side of the unit when looking with the direction of the airflow.


  • High performance due to application-suited circuit design
  • Dual discharge air throw: draw-through on request
  • Long-term assurance: highly efficient, ErP 2015 fans
  • Customize the air cooler with many available options and accessories
  • Low height: The maximum space in the chill room can be utilised
  • Delivered on a wooden frame for easy mounting and the fans are mounted to the outside of the air cooler
  • Higher specific power, reduced fan speed and air velocity through the coil and significantly reducced current consumption
Application Quiet Cooling & Freezing
Engineering level Level 2, flexible products
Number of types 294
Capacities NH3 3 – 139 kW (NH3 pump System – SC2)
Capacities CO2 2,8 – 129 kW (CO2 dx – SC2)
Capacities Coolant 3,2 – 176 kW (E-glycol 37% tl1=5°C tin=-7°C tout=-4°C)
Fan diameter 450, 500, 560 and 630 mm
Max. number of fans each aircooler 6
Air configuration Dual discharge blow-through request draw-through is available
Suitable for NH3 pump System and other coolants
Tube pitch square
Fin spacing 6, 8, 10, 12 and 15 mm
Tube material Steel, hot dipped galvanized
Fin material Steel, hot dipped galvanized
Sheet material Casing material of galvanized sheet steel
Finishing Neutral (not painted)
Connection/Header side Bend/header protection by end covers, easy removed for maintenance
Fasteners Stainless steel
Fixing defrost Defrost by hot gas spiral or electric defrost elements will be fixed to the bottom side of the coil
  • Blow-through
  • Draw-through
  • Electrical defrost
  • Hot gas defrost
  • Water defrost
  • Anti-condensation heating drip tray
  • Fan heating
  • Hinged fans
  • Hinged drip tray
  • Insulated drip tray
  • Polyester drip tray
  • Insulations disks
  • Feet for floor mounting
  • 60Hz Fans
  • EC Fans
  • 1 Phase Fans
  • Coolants
  • DE system
  • CO2
  • Other casing materials
  • Other fin spacings
  • Almg fins
  • Goldlack fins
Show Buttons
Hide Buttons