Goedhart DVS


The Goedhart DVS customized industrial range of dual discharge ceiling mounted air coolers are especially suitable for cooling and working room applications. The height of the aircooler is low, so the maximum space in the chill room can be utilised. The fans are mounted to the outside of the air cooler.

Kelvion Goedhart Customized Air Cooler DVS
Kelvion Goedhart Customized Air Cooler DVS

The Goedhart DVS series is part of our customized series. The advantage: A very high degree of customization is evident. Circuits matched to application give great performance and the optimized heat exchanger geometry have a greater specific output of the heat exchanger. This High Performance Air cooler is available for both air flow directions (draw-through and blow-through). As a result, the Goedhart DVS can be flexibly and effectively designed for individual refrigeration requirements – especially for complex applications.

The coil blocks have copper tubes mechanically expanded into fully collared aluminium fins. A good thermal contact is achieved by expansion of the tubes into the fin collars, that are also utilised as spacers to provide a constant distance between the fins. All coolers are pressure tested to 40 bar (lower by cooling mediums) and are supplied with a light over pressure charge of dried air. Suitable for almost all known refrigerants and coolants, with the exception of NH3. For CO2 applications we have a special LX-range available.

The Goedhart DVS is an adaptability artist. With its countless possible configuration possibilities, the Goedhart DVS can be designed spot-on for the most demanding refrigeration tasks.


  • High performance due to application-suited circuit design
  • Dual discharge air throw: draw-through on request
  • Long-term assurance: highly efficient, ErP 2015 fans
  • Hinged drip tray prepared, easy removable cover plates
  • The maximum space in the chill room can be utilised
  • Delivered on a wooden frame for easy mounting
  • Optimized heat exchanger geometry and an aerodynamically intergrated fan system
Engineering level Customized products
Application Cooling and working rooms (+20°C to -10°C)
Number of types 480
Capacities HFO/HFK 1,5 – 200 kW (R404A dx – SC2)
Capacities CO2 1,8 – 197 kW (CO2 dx – SC2) up to 60 bar
Capacities Coolant 4,4 – 274 kW (E-glycol 37% tl1=5°C tin=-7°C tout=-4°C)
Fan diameter 450, 500, 560 and 630 mm
Max. number of fans each aircooler 6
Air configuration dual discharge
Suitable for all known refrigerants and coolants, with the exception of NH3
Tube pitch square
Fin spacing 4, 7 and 10 mm
Tube material Copper 15 mm internally plain or internally enhanced
Fin material Aluminium
Mounting Construction for ceiling mounting. The flush mounting protects against dust and dirt
Sheet material Casing material of galvanized sheet steel
Finishing Standard white epoxy spray finishing
Connection/Header side Protection by removable end covers, easy removed for maintenance
Drip tray Hinged drip tray prepared (only construction without feet)
Fasteners Stainless steel
Fixing defrost Defrost by hot gas spiral or electric defrost elements will be fixed to the bottom side of the coil
  • Blow-through
  • Draw-through
  • Internally plain tube
  • Internally enhanced tube (i)
  • Electrical defrost
  • Hot gas defrost
  • Water defrost
  • Anti-condensation heating drip tray
  • Fan heating
  • Hinged fans
  • Hinged drip tray
  • Insulated drip tray
  • Insulated fan plate
  • Polyester drip tray
  • Insulation disks
  • Feet for floor mounting
  • 60Hz Fans
  • EC Fans
  • 1 Phase Fans
  • Coolants
  • Pump System
  • CO2
  • Vertical Connections
  • Other casing materials
  • Other fin spacings
  • Almg fins
  • Goldlack fins
Show Buttons
Hide Buttons