Goedhart BR50/BR50XF


The Goedhart BR50/BR50XF blast freezers are a range of floor mounted air coolers specially designed for quick freezing of food products with a best performance due to special tubes.

Shock freezing foodstuffs is technically extremely demanding on air coolers. The Goedhart BR50/BR50XF blastfreezer meets these demands effortlessly.

The technical specifications covering the cooling surface, the air volume, the finned piping system and the distribution of the refrigerant have all created benchmarks and guarantee the reliability of the process.

The process of quick freezing is very important to minimize the weight loss and conserving the qualities of the food product. The nutritional value is maintained, as well as the original taste. The fans on this range of air coolers have respectively standard 50 and 100 Pa external pressure available to enable the quick freezing process. A lot of possible optional extras are available.

This range is part of our customized industrial series. The coil blocks have stainless steel 304 tubes expanded into fully collared aluminium fins. A good thermal contact is achieved by expansion of the tubes into the fin collars, that are also utilised as spacers to provide a constant distance between the fins. All coolers are pressure tested to 40 bar (lower by cooling mediums) and are supplied with a light over pressure charge of dried air. Suitable for NH3/CO2- pump system and de system and the most coolants.


  • High performance due to application-suited circuit design
  • Air direction of all fan variants – blow-through
  • Long-term assurance: highly efficient, ErP 2015 fans
  • Construction for floor / ceiling mounting
  • Higher specific power, reduced fan speed and air velocity through the coil and significantly reduced current consumption
  • Minimize the weight loss and conserving the qualities of the food product. Standard 50 Pa (BR50) or 100 Pa (BR50XF) external pressure available
Engineering level Industrial products
Application Blast freezing
Number of types 12
Capacities NH3 21 – 117 kW (NH3 pump System – SC2)
Capacities CO2 15 – 94 kW (CO2 dx – SC2)
Fan diameter 630 mm
Max. number of fans each aircooler 6
Air direction Blow-through
Suitable NH3/CO2/H(C)FC pump System and DE System and the most coolants
Tube pitch square
Fin spacing 7, 10 and 12 mm
Tube material Stainless steel 304 15 mm
Fin material Aluminum
Mounting Floor- or ceiling
Material galvanized sheet steel
Finishing neutral (not spray painted)
Fasteners stainless steel
Protection bends and headers By removable cover plates
Defrost hot gas spiral or electric defrost elements will be fixed to the bottom side of the coil
  • Blow-through
  • Electrical defrost
  • Hot gas defrost
  • Water defrost
  • Secondary defrost
  • Anti-condensation heating drip tray
  • Fan heating
  • Insulated drip tray
  • Polyester drip tray
  • Insulation disks
  • Feet for floor mounting
  • EC Fans
  • 1 Phase Fans
  • Coolants
  • DE System
  • CO2
  • Vertical Connections
  • Other casing materials
  • Other fin spacings
  • Almg fins
Show Buttons
Hide Buttons